HSNH120-46W1三螺桿泵HSNH120-46W1三螺桿泵、供油泵、液壓油輸送泵
【簡單介紹】
【詳細說明】
HSNH120-46W1三螺桿泵、供油泵、液壓油輸送泵
品牌:黃山天曼泵業
TMP-HSNH120-46三螺桿泵 TMP-HSNH120-46N三螺桿泵 TMP-HSNH120-46Z 三螺桿泵
TMP-HSNH120-46NZ三螺桿泵 TMP-HSNH120-46W1三螺桿泵 TMP-HSNH120-46W1Z三螺桿泵
流量:113.5L/min
壓力:1.0MPa
功率:2.46KW
轉速:1450r/min
驅動方式:電機驅動
進出口徑 65mm 、50mm
HSNH系列三螺桿泵產品簡介結構特點優勢說明
1、HSNH系列三螺桿泵產品概述簡介:
1、HSNH series three screw pump product brief introduction
HSNH系列三螺桿泵是無脈動軸向輸送具有一定潤滑性介質的定量容積式低壓轉子泵,適于輸送燃料油、潤滑油、液壓油、礦物油等油類和具有潤滑性的流動性液體。所輸送的介質中不得含有任何磨料顆粒和對泵材料有腐蝕的物質。HSNH系列三螺桿泵由特殊型線(擺線)構成的螺旋型面,當電機或馬達驅動主動螺桿轉動時,其不斷運動的各個密封腔室逐漸形成真空,液體在大氣壓的作用下由吸入口吸入并沿軸向連續、無脈動的輸送到排出口,無攪拌、乳化現象。形成排出壓力的能力取決于系統負載和螺桿密封腔的數量,同時也與輸送介質的粘度以及驅動轉速也有一定的關系。
HSNH series three screw pump is quantitative volumetric type low-pressure rotor pump without pulsation of axial transport a certain lubricating medium, suitable for delivery of fuel oil, lubricating oil, hydraulic oil, mineral oil and other oil and fluid with lubricity. The transmission medium not containing any material abrasive particles andthe corrosion of pump material. The HSNH series three screw pump by special type line (cycloidal) spiral surface composed of, when the motor or motor driven active screw rotation, the constant movement of the sealing cavityformed in vacuum, the liquid under the action of atmospheric pressure by the suction port of the suction along the axial direction and continuous, no pulse pneumatic conveying to the outlet, without stirring, emulsifying phenomenon. The number of the formation of discharge pressure depends on the ability of the system load and screw seal cavity, and the transmission medium viscosity and driving speed also has a certain relationship.
HSNH系列三螺桿泵的主動螺桿和從動螺桿采用液壓平衡裝置,被輸送的液體在泵腔內做連續、勻速的軸向直線運動,無脈動,噪音低,運轉平穩,流量壓力穩定,工作平穩,振動小。
HSNH series three screw pump adopts the hydraulic pressure balancedevice, liquid is transferred in the pump cavity continuous, uniform axial linear movement, no pulse, low noise,smooth operation, flow pressure is stable, stable work, small vibration
HSNH系列三螺桿泵的零部件通用互換性好,可以任意拆解,更換相應的零部件。泵零件少,結構簡單,重量輕,安裝、使用、維修方便,效率高,壽命長。
HSNH series three screw pump has good compatibility, can be arbitrarily disassembled, replace the corresponding parts. Pump less parts, simple structure, light weight, installation, repair, convenient use, high efficiency, long life.
三螺桿泵的從動螺桿的軸向力支撐在后蓋或主動螺桿上,并由液壓力驅動旋轉,從動螺桿由液壓力驅動,,主動螺桿和從動螺桿之間沒有機械接觸,螺桿之間,螺桿和泵套之間皆有油膜保護,因而螺桿型面僅傳遞液壓扭矩,并不受力,也無磨損和機械摩擦,對全部傳動零件而言,均由被輸送介質形成的油膜保護和潤滑。
The axial force of the three screw pump driven screw support at the back or the driving screw, and by the hydraulic pressure drive rotation, driven screw drive, by the fluid pressure, there is no mechanical contact, between the driving and driven screws between the screw, there is oil film protection between the screw and a pump sleeve, thescrew type surface only transfer fluid torque, no stress, no wear and mechanical friction, on all the transmissionparts, by the oil film to protect the transported medium formation and lubrication.
三螺桿泵的主桿的徑向旋轉跳動由平衡活塞套也可以叫滑動軸承定位,且借助于平衡活塞和軸套的間隙使高壓腔和密封腔分開,在密封腔內裝有機械密封,無泄漏,腔內的油液回油孔與泵的吸入腔相通,因而不受排出壓力的影響。
Three screw pump rod radial rotation beating by balancing piston sleeve can also be called sliding bearing positioning, and by the clearance between the piston and sleeve balance that high pressure chamber andseparate the sealing cavity, a sealing cavity in mechanical seal, no leakage, cavity of the oil return hole and pump suction cavity, thus not influenced by the discharge pressure.
具有很強的自吸能力,節能低耗,不需要底閥及每次開機前灌油。
Has a strong self absorption capacity, low energy consumption, without bottom valve and before each start filling.
組合系列化有多種結構,可用于臥式(H),法蘭式(F)和立式(S)浸油式(J)以及懸掛式(K)安裝。
Combined series has a variety of structure, can be used for horizontal (H), flange type (F) and vertical (S) oil immersed type (J) and suspension (K) installation.
根據所輸送介質需要還可提供加熱或冷卻結構。
According to the transmission medium to provide heating or cooling structure.
對于潤滑性相對較差的介質,可以采用軸承外置結構(W1)以及金屬波紋管密封。保證三螺桿泵優良的使用壽命。
For the relatively poor lubrication medium, can be used with external bearing structure (W1) and metal bellows seal. To ensure the service life of three screw pump with good.
為了保護泵、電機和管路系統,泵必須帶有外置或內置安全閥裝置。
In order to protect the pump, motor and pipeline systems, the pump must be with external or internal safety valvedevice.
可輸送介質種類:
Transport medium
A 潤滑性液體:液壓油,礦物油,機械油潤滑油淬火油,齒輪油,變壓器油,汽輪機油,水乙二醇,原油,動植物油等
A lubricating liquid: hydraulic oil, mineral oil, mechanical oil lubrication oil quenching oil, gear oil, transformer oil,turbine oil, water, ethylene glycol, crude oil, animal and vegetable oil
B 低潤滑性液體:輕柴油,重柴油,燃油,燃料油,重油,渣油,含臘稀油,冷卻液,皂化液等
B low lubricating liquid: light diesel oil, heavy diesel oil, fuel oil, fuel oil, heavy oil, residual oil, oil, dilute waxsaponification liquid coolant, etc.
C 粘性液體:各種合成橡膠液,人造膠液,乳化液等
C viscous liquid: liquid synthetic rubber, synthetic glue, emulsion, etc.
HSNH三螺桿泵性能特點:
The performance characteristics of the three screw pump HSNH:
流量范圍:10~10000 L/min (升/分鐘) 0.6~620m3/h (立方/小時)
Flow range: 10 ~ 10000 L/min (L / min) 0.6 ~ 620m3/h (cubic meters / hour)
壓力范圍:0~4 Mpa(兆帕)0~40 ba-(巴) 0-40 kg/f (公斤力/平方厘米)
Pressure range: 0 ~ 4 Mpa (Zhao Pa) 0 ~ 40 ba- (BA) 0-40 kg/f (kg / cm2)
輸送介質粘度范圍:2-10000 cst(厘斯)
Medium viscosity range of delivery: 2-10000 CST (CST)
泵送溫度:300 ℃ (攝氏度)
Pumping temperature: 300 ℃ (Celsius)
容許zui高轉速:3600 -/min (轉/分鐘)
Allowable maximum speed: 3600 -/min (RPM)
我們的工作職責:
Our job responsibilities:
· 全面的螺桿泵咨詢服務,并提供符合相應工況條件的合理建議和報價
· screw pump technology comprehensive support services, and provide reasonable
suggestions to meet the corresponding condition and quotation
· 保障螺桿泵各相關零部件齊全
· ensure all related parts complete screw pump
· zui快速的交付供貨配送服務,包括用于舊泵的零件 (所有交付的泵或者是零件都有精確的文件記錄,您
只需要提供螺桿泵的產品型號和出廠序列號,剩下的事情就交給我們來處理。
The most rapid delivery, delivery and distribution services, including for the old pump
parts (all delivery pump orparts can be accuray documented, you only need to provide
the screw pump product model number and serial number, the rest is up to us to handle.
· 連夜供貨發運,例如,適用于中國大陸。
· overnight delivery shipment, for example, is suitable in mainland china.
· 小型螺桿泵零部件的快遞郵寄服務
· small screw pump parts express mail service
整個培訓可以應用于泵及系統
The whole training can be applied to the pump and system
對于客戶員工的培訓將由天曼泵業團隊有經驗的工程師和技術人員針對不同的使用情況而進行培訓。
給您帶來的益處:
Engineers and technical personnel for the customer and employee training will be provided by the dayManchester pump team experienced in different use cases and training.
· 在天曼泵業公司的培訓
To bring you the benefits:
· 螺桿泵使用現場培訓
In the days of man pump company training
· 以螺桿泵實際應用為宗旨的授課內容
· screw pump using on-site training
· 在車間中實際的操作練習
The screw pump application for the purpose of teaching contents
· 給每位受訓者都配備培訓資料
In the workshop in actual practice
公 司 名稱: | 黃山天曼泵業有限公司 |
姓名: | 程曉 (銷售 ) () |
辦 公 地址: | 中國 黃山市徽州區城北工業園 |
郵 編: | 245400 |
電 話: | 86- |
傳 真: | 86- |
移 動 : | |
郵 箱: | Hstmby01 |
: |
|
阿 里 旺旺: | 旺旺:hstmby01 |
公司主頁: | http;//www.hstmby.comhttp://www.luogb.com http://www.cntmby.comhttp://www.tm-p.cc |
Company name: Mount Huangshan teamon pump industry limited company
Contact person: Mr. Cheng Xiao (Sales Manager) ()
Office address: China Huangshan City Huizhou area north of the City Industrial Park
Postal Code: 245400
86-
86-
phone:
: Hstmby01
: :
A: I want to: hstmby01
Company homepage: http; //www.hstmby.comhttp://www.luogb.com
http://www.cntmby.comhttp://www.tm-p.cc
相關產品
- HSNH440-42三螺桿泵HSNH440-42三螺桿泵 黃山螺桿泵廠家 現貨
- HSNH440-40三螺桿泵HSNH440-40三螺桿泵 優質螺桿泵供應商
- HSNH280-54三螺桿泵HSNH280-54三螺桿泵 稀油潤滑泵 螺桿泵
- HSNH280-46三螺桿泵HSNH280-46三螺桿泵 節能型三螺桿油泵
- HSNH280-43三螺桿泵HSNH280-43三螺桿泵 黃山三螺桿泵 供油泵
- HSNH210-54三螺桿泵HSNH210-54三螺桿泵 供應黃山三螺桿泵
- HSNH210-46三螺桿泵HSNH210-46三螺桿泵 500強企業
- HSNH210-40三螺桿泵HSNH210-40三螺桿泵 工業泵 黃山螺桿泵
- HSNH120-54三螺桿泵HSNH120-54三螺桿泵 世界
- HSNH120-46三螺桿泵HSNH120-46三螺桿泵、低壓無脈動三螺桿泵
- HSNH120-42三螺桿泵HSNH120-42三螺桿泵 優質黃山三螺桿泵
- HSNH80-54三螺桿泵HSNH80-54三螺桿泵、7星級售后服務
- HSNH80-46三螺桿泵HSNH80-46三螺桿泵、螺桿泵行業
- HSNH120-42三螺桿泵HSNH120-42三螺桿泵、質量 價格全有保障
- HSNH80-54三螺桿泵HSNH80-54三螺桿泵、超乎你的想象
- HSNH80-46三螺桿泵HSNH80-46三螺桿泵、鋼鐵廠家*產品
- HSNH80-42三螺桿泵HSNH80-42三螺桿泵、世界螺桿泵品牌
- HSNH80-36三螺桿泵HSNH80-36三螺桿泵、螺桿泵行業*
- HSNH40-46三螺桿泵HSNH40-46三螺桿泵、黃山三螺桿泵
- HSNH40-38三螺桿泵HSNH40-38三螺桿泵、黃山HSN系列三螺桿泵
- HSNH40-46W1HSNH40-46W1三螺桿泵、黃山三螺桿泵
- HSNS40-38NZ三螺桿泵HSNS40-38NZ三螺桿泵、天曼HSN系列螺桿泵
- HSNH120-54三螺桿泵HSNH120-54三螺桿泵、無脈動型三螺桿泵
- HSNH120-46三螺桿泵HSNH120-46三螺桿泵、通用普及型三螺桿泵
- HSNH120-42三螺桿泵螺桿泵廠家、HSNH120-42三螺桿泵
- HSNH80-54三螺桿泵HSNH80-54三螺桿泵、螺桿泵泵芯
- HSNH80-46三螺桿泵天曼螺桿泵、HSNH80-46三螺桿泵
- HSNH80-42三螺桿泵HSNH80-42三螺桿泵、
- HSNH80-36三螺桿泵HSNH80-36三螺桿泵、黃山三螺桿泵
- HSNH40-54三螺桿泵HSNH40-54三螺桿泵、優質三螺桿泵
- HSNH40-46三螺桿泵HSNH40-46三螺桿泵、5*三螺桿泵
- HSNH120-54NZ三螺桿泵全品質螺桿泵、HSNH120-54NZ三螺桿泵
- HSNH120-46NZ三螺桿泵鋼鐵廠家 優質螺桿泵供應商HSNH120-46NZ三螺桿泵
- HSNH120-42NZ三螺桿泵天曼螺桿泵、HSNH120-42NZ三螺桿泵
- HSNH80-54NZ三螺桿泵節能(節電、環保)螺桿泵HSNH80-54NZ三螺桿泵
- HSNH80-46NZ三螺桿泵品質,輝煌天曼HSNH80-46NZ三螺桿泵
- HSNH80-42NZ三螺桿泵全國銷量*螺桿泵廠家HSNH80-42NZ三螺桿泵
- HSNH80-36NZ三螺桿泵*螺桿泵生產廠家HSNH80-36NZ三螺桿泵
- HSNH40-54NZ三螺桿泵HSNH40-54NZ三螺桿泵、全國質量*行產品
- HSNH40-46NZ三螺桿泵HSNH40-46NZ三螺桿泵、螺桿泵生產廠家
請輸入產品關鍵字: