一、性能參數
風量范圍：2655～83650m3/h
風壓范圍：520～2360 Pa
傳動方向：皮帶式（C）
方向角度：可制成順時針或逆時針，均可制成0°，45°，90°，135°，180°，225°，270°，315°八種角度。
二、用途
此風機結構分為帶殼式和不帶殼式（根據客戶需求）。風葉分為后傾式及S型風葉，葉片寬大，流線型對于涂裝設備烤漆爐，工業烤箱，工業烤爐，熱風循環場所顯著，中壓型，風葉設計不易造成堵塞，噪音低，廣泛用于涂裝設備行業，高溫爐行業，陶瓷窯爐行業等輸送熱氣
特別說明：
插入式風機作熱風循環時，請在停機前預先關閉熱能設備10分鐘以后再關閉風機，以免使風機葉輪局部產生高溫而變形。
插入式風機在安裝時風機外殼請保持與發熱源在2.5米以上，如條件允許建議90度安裝。
普通鐵材質保溫的，風機只能承受200度以內的溫度，高于此溫度請選擇不繡鋼材質（需客戶說明）
Performance parameters:
Air volume range: 2655 ～ 83650m3/h
Wind pressure range: 520-2360 Pa
Driving direction: belt type (C)
Direction angle: it can be made clockwise or anticlockwise, and can be made into eight angles: 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °, 315 °.
Application:
The fan structure is divided into shell type and non shell type (according to customer requirements). The blades are divided into backward inclined and S-shaped blades. The blades are wide and streamlined. They are remarkable for paint ovens, industrial ovens, industrial ovens and hot air circulation places of painting equipment. They are medium pressure type. The design of the blades is not easy to cause blockage, and the noise is low. They are widely used in painting equipment industry, high-temperature furnace industry, ceramic kiln industry, etc. to transport hot air
Special instructions:
When the plug-in fan is used for hot air circulation, please turn off the thermal equipment 10 minutes before shutdown, and then turn off the fan to avoid local high temperature and deformation of the fan impeller.
When installing plug-in fan, please keep the fan shell more than 2.5 meters away from the heat source. If conditions permit, it is recommended to install the fan at 90 degrees.
For ordinary iron insulation, the fan can only withstａnd a temperature of less than 200 degrees. If the temperature is higher than this, please choose stainless steel (to be explained by the customer)
