一、性能參數
風量范圍：2655～83650m3/h。
風壓范圍：520～2360 Pa。
傳動方向：皮帶式（C）。
方向角度：可制成順時針或逆時針，均可制成0°，45°，90°，135°，180°，225°，270°，315°八種角度。
二、用途
此風機分為后傾式及S型風葉，葉片寬大，流線型設計不易造成堵塞。廣泛用于無塵車間送風，車間送風，烤爐斷熱，紡織機械，窯爐設備，定型機或涂布機設備排風，各大廈通風，工業排氣等行業送風或排風。
特別說明：
進風口可制作成：方形及圓形。
軸承座：連體式，分體式。
請定期給風機加注相應高溫型潤滑油。
排氣風機請計算系統阻力，無塵房安裝多臺風機時請相互保持距離或隔離處理，以免發生搶風現象，造成性能減弱。
Performance parameters:
Air volume range: 2655 ～ 83650m3/h.
Wind pressure range: 520-2360 Pa.
Driving direction: belt type (C).
Direction angle: it can be made clockwise or anticlockwise, and can be made into eight angles: 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °, 315 °.
Application:
The fan is divided into backward inclined and S-shaped blades. The blades are wide and the streamline design is not easy to cause blockage. It is widely used for air supply or exhaust in dust-free workshops, workshops, ovens, textile machinery, kiln equipment, sizing machines or coating machines, buildings, industrial exhaust and other industries.
Special instructions:
The air inlet can be made into square and round.
Bearing pedestal: integral type, split type.
Please fill the fan with corresponding high-temperature lubricating oil regularly.
Please calculate the system resistance of the exhaust fan. When installing multiple fans in the dust-free room, please keep a distance from each other or isolate them, so as to avoid the phenomenon of wind rushing and weakening the performance.
